Check that the dip switches on HALO are set to ON, then press and hold down the MENU and RADIO buttons at the same time until the LEDs stop flashing to confirm that the safeties are disabled. Finally, check that the jumper between STOP and COM is present.

Press and hold the button on the receiver (in the case of a plug-in or universal clamp receiver) or the radio button on the control unit (in the case of an integrated receiver) for about 3 seconds until the LED lights up, then release it. Within 7 seconds, press the button you want to delete on the radio control until the LED on the receiver goes out and then starts flashing. Confirm the deletion by briefly pressing the button on the receiver: if the LED returns 1 long flash, the deletion is successful.

Yes, it is possible to customise the slowdowns using KUBE PRO (through the smartphone app), through the DYL wired controller or directly on the control units equipped with LCD displays. The setting can be found within the "basic settings" on the control units or through DYL , or in the advanced settings menu of the smartphone app for KUBE Pro.